Screws and Wall Plugs Installation Guide

Our quick and handy visual guide to help you install your new sign.

What You'll Need

• Screws and Wall Plugs: these can be found in your package in a brown paper bag.

• A Pen: or anything that'll help you dot the marks where you'll want to drill the holes.

• An Electric Drill: we recommend using a 5mm masonry drill bit.

• A Phillips Screwdriver: make sure it's a Phillips PZ2 one.

A step-by-step guide for installing a screw fixing: showing a hand holding a screw, aligning it with a hole in a panel, and using a screwdriver to fasten it securely.

Choose Where You Want the Sign to Go

Your sign can go pretty much anywhere. If you've chosen screws and wall plugs for your sign, you can install your sign into a brick/stone wall, a wooden gate or fence or even onto a door (we recommend not doing this unless your door is old).

STEP 1/4

Step-by-step instructions showing a hand holding a screw, positioning it in a hole on a panel, and using a screwdriver to secure the screw into the panel.

Drill Out the Holes in the Wall

Drill into the wall/surface where the dots are using an 5mm masonry drill bit. Drill nice and deep so the wall plugs sit flush in each hole.

STEP 2/4

A visual guide for installing a screw fixing: showing a hand holding a screw, aligning it with a hole in a panel, and then using a screwdriver to drive the screw into place.

Insert the Wall Plugs in the Wall Holes

Push the wall plugs included in your signs package into the newly-drilled wall holes, until the entire wall plug sits flush against the wall.

STEP 3/4

Simple instructions for installing a screw fixing: showing a hand holding a screw and aligning it with a hole in a panel, then using a screwdriver to secure the screw in place.

Screw in the Screws into the Wall Plugs

With your screwdriver and screws to hand, put the sign back onto the surface, aligning the screw holes with the newly-inserted wall plugs and carefully screw the sign into place. Once all the screws are tightened, you're done!

STEP 4/4

Ready to personalise your a sign, or want another?

Whether you're looking for an laser printed or an engraved & painted sign, The Bespoke Sign House workshop can do it all. We have a wide array of design options available, view some of our best-selling house signs, pick your favourite and start designing your very own sign in seconds. With our online sign designer, you get a live preview before it is handcrafted by our team, wrapped and delivered to your door.

1 13